Hydraulic unit model У27.06.088
Purpose
The hydraulic unit of the model У27.06.088.2 (U27.06.088.2) is used with press drives of the СГУ(SGU) model with a force of 100-160 ton-force, designed for processing thermosetting plastics, rubber compounds and performing technological calibration, exhausting and other operations.
The hydraulic unit operates on pure mineral oil with kinematic viscosity of 20-200 mm2 / s at oil temperature of 15 ... 50 ° C and ambient temperature of 1 ... 45 ° C.
The cleanliness class of the working fluid is not lower than 12 according to GOST 17216-71.
Recommended brands of oils: ИГП-30, ИГП-38, ТУ.3.810.1413-78, ВНИИ НП-403 GOST 16728-78, industrial И-20А…И-40А according to GOST 20799-88.
Technical parameters
| Parameter name | Parameter data | |||
| Nominal pressure, MPa | ||||
| piston pump lines | 32 | |||
| vane pump lines | 2,5 | |||
| Pressure setting pressure relief valves | ||||
| КП1 | 5,0 | |||
| КП4 | 2,5 | |||
| КП2 | 33 | |||
| КП3 | 40 | |||
| РД | 25 | |||
| Flow volume at the outlet of the hydraulic unit, l / min |
||||
| at a pressure of 32 MPa | 8 | |||
| at a pressure of 2,5 MPa | 138 | |||
| Control | electrohydraulic | |||
| Tank nominal capacity, l | 200 | |||
| Overall dimensions, mm: | ||||
| length | 1270 | |||
| width | 655 | |||
| height | 1145 | |||