Hydraulic unit model УСГ 600/800
Purpose
The hydraulic unit model УСГ-600/800 (USG 600/800) is for drive of the working bodies of two presses with plunger cylinders model OT-076 or K20.301.
The hydraulic unit is a tank on which two main pump units are mounted, providing all operating modes of the presses and an additional installation that supplies oil to the control line and to the pressure filter for cleaning.
The hydraulic unit operates on pure mineral oil with kinematic viscosity of 20-35mm2 / s at oil temperature of 15 ... 50 ° C and ambient temperature of 1 ... 45 ° C.
The cleanliness class of the working fluid is not lower than 12 according to GOST 17216-71. The nominal fineness of filtration is 25 μm.
Recommended brands of oils: ИГП-30, ИГП-38 ТУ.3.810.1413-78 ВНИИ НП-403 GOST 16728-78, industrial И-20А - И-40А according to GOST 20799-88.
Technical parameters
Parameter name | Value | |||
Working pressure, MPa (kg/cm2) | ||||
low hydraulics (line plate pump) |
3(30) | |||
high hydraulics (line piston pump) |
20(200) | |||
operating pressure of control line | 2(211) | |||
The set pressure of the safety valve, MPa (kgf/cm2) |
||||
pump unit Н1 | ||||
line of the piston pump (КП1,КП2) | 20,5±0,2 | |||
plate pump line (КП3) | 3,2±0,1 | |||
pump unit Н2 | ||||
line of the piston pump (КП5) | 20,5±0,2 | |||
plate pump line (КП4) | 3,2±0,1 | |||
pump unit Н3 | ||||
control line (КП6) | 2,0±0,1 | |||
line filter | 0,3...0,5 | |||
Feed volume, l / min, not less: | ||||
pumping unit Н1 | ||||
piston pump double-flow | ||||
flow Н1.1 | 14,5 | |||
flow Н1.2 | 14,5 | |||
vane pump Н1.3 | 200 | |||
pump unit Н2 | ||||
piston pump double-flow Н2.1 | 29(14,5+14,5) | |||
vane pump Н2.2 | 200 | |||
pump unit Н3 | ||||
dual-flow vane pump | ||||
flows Н3.1 | 9 | |||
flows Н3.2 | 33 | |||
The nominal tank capacity, l | 1500 | |||
Control | electrohydraulic | |||
Weight of hydraulic unit, kg | 2200 | |||
Overall dimensions, mm: | ||||
length | 2200 | |||
width | 800 | |||
height | 1700 | |||