Hydraulic units series P32 type
Purpose
Hydraulic units of the P32 type are designed for individual drive of the working bodies of hydraulic single-column presses from 100 to 2500 kN with a hydraulic pusher-ejector and without a hydraulic pusher-ejector. Hydraulic unit works on pure mineral oil with viscosity of 21-260 mm 2 / l at oil temperature ranged from 10 to 60 o C and the operating fluid temperature from 1 to 45 o C according to GOST 14066-68.
The cleanliness class of the working fluid is not lower than 12 according to GOST 17216-71. The nominal fineness of filtration is 25 μm. Recommended brands of oils: ИГП-30, ИГП-38, ТУ3.810.1413-78, ВНИИ НП-403 GOST 16728-78.
The complete set of hydraulic presses hydraulic units
Model of hydro unit |
What presses are completed |
Technological purpose |
Effort, t. s. |
21П32А(В) |
П6320Б |
Editing, firmware, stamping |
10 |
71П32А(В) |
ПБ6328Б |
Editing, firmware, stamping |
63 |
73П32А(В) |
П3286 |
Editing, firmware, stamping |
63 |
91П32А(В) |
ПБ63325 |
Editing, firmware, stamping |
63 |
93П32А(В) |
П3232Б, П3234Б |
Editing, firmware, stamping |
160, 250 |
Technical parameters
Parameter name |
21П32В |
71П32В |
73П32В |
91П32В |
93П32В |
|||||||
Nominal pressure MPa | ||||||||||||
main pump line |
16 |
25 |
25 |
25 |
25 | |||||||
line of the auxiliary pump |
4 |
2,5 |
2,5 |
2,5 |
2,5 | |||||||
the lines of the hydraulic pump-ejector |
- |
32 |
32 |
32 |
32 | |||||||
volumetric flow at nominal pressure dm / min | ||||||||||||
main pump line |
12 |
20 |
20 |
25 |
25 | |||||||
the lines of the hydraulic pump-ejector |
20 |
30 |
30 |
20 |
20 | |||||||
range of automatic regulation of the volume flow of the main pump line with a pressure change from 0.98 MPa | ||||||||||||
to the nominal, l / min, not less than |
45...12 |
50...20 |
50...20 |
80...25 |
80...25 | |||||||
efficiency of the hydraulic unit in % |
72 |
72 |
72 |
72 |
72 | |||||||
hydraulic unit control (remote electrohydraulic) |
Remote electro-hydraulic | |||||||||||
pressure adjustment of safety valves, MPa (kgf / cm 2 ) | ||||||||||||
main pump line |
|
27 |
27/32 |
27 |
27/32 | |||||||
line of the auxiliary pump |
2,5 |
2,5 |
2,5 |
2,5 | ||||||||
support valve lines |
0,6...2 |
0,6...2 |
0,6...2 |
0,6...2 | ||||||||
Adjustment pressure, MPa (kgf / cm 2 ) |
(10) |
(6...20) |
(6...20) |
(6...20) |
(6...20) | |||||||
Hydraulic unit mass, max |
210 |
440 |
480 |
570 |
610 | |||||||
Dimensions, mm | ||||||||||||
length |
600 |
820 |
820 |
940 |
940 | |||||||
width |
440 |
520 |
520 |
600 |
600 | |||||||
height |
1130 |
1325 |
1520 |
1450 |
1000 | |||||||